Fire Retardant Coating Dallas

Flame Safe's WOOD SAFE (formally J.D.P. 108) is a is an aqueous based resin that is colorless, odorless, non-toxic, and environmentally friendly fire retardant for interior use - UL fire rated f.s. 35; s.g. 95 - flat finish, paintable, stainable. Long term fire retardant protection, WOOD SAFE, can be applied to any type of wood such as yellow pine, douglas fir, SPF, cedar, oak, birch, walnut, and redwood. WOOD SAFE is applied in 3 coats (330-390 sq.ft. /coat) allowing drying time between coats, with the final coverage rate of 110-130 square feet to the gallon. WOOD SAFE creates a barrier to fire. The chemical reaction, when exposed to flame, creates an intumescing action causing the surface to bubble up and thereby creating a barrier between the fire and treated material. Structures under construction can be effectively made fire safe. As soon as the surface is enclosed, spray all exposed interior surfaces such as studs, trusses, subfloor, joist and interior outside walls. Technical information and Application

PAPER SAFE is a water-based, clear, odorless, non-toxic, and environmentally friendly fire retardant. Applied at a rate of 300 to 500 square feet to the gallon PAPER SAFE is an excellent fire protection for holiday/seasonal paper decorations . Before applying PAPER SAFE check for color fastness.

 

PAPER SAFE, formulated and developed specifically for the corrugated board, cardboard box and packaging industry is a fire retardant coating and penetrant. PAPER SAFE exceeds the United States Navy's fire retardant standard ASTM-E-162 (flame spread), as well as standard ASTM-E-662 (smoke generation). PAPER SAFE is an aqueous based resin that is colorless, odorless, non-toxic, and adds no appreciable weight. The National Fire Protection Association (NFPA) - 30 Standard became effective September 1, 1991, which requires that combustible liquids in plastic containers be packaged in some sort of noncombustible shipping container. NFPA-30 is only concerned with the ability of the full assembly to pass the fire requirements of the U.L. Procedure Subject 2019. Flame Safe's PAPER SAFE as a component part will assist in the passing of the "Final Assembly Package Procedure". Technical information and Application

TREE SAFE is a fire retardant spray on coating primarily used for indoor Christmas trees. In addition, TREE SAFE acts as a wood preservative keeping the needles of the tree greener for a longer period of time. One quart covers up to an 8' tree. With a mist sprayer, start at the top of the tree and spray all branches and foliage. After spraying pour the remainder of the TREE SAFE into the stand reservoir mixed with water. Allow the tree to dry indoors or in a covered area.

 

TREE SAFE is an excellent fire protection on dry grass and brush. It’s application can slow or stop the advance of the flame front caused by winds in areas of exceptionally low humidity.

As a Federal Emergency Management Agency (FEMA) partner, Flame Safe offers a substantial discount to homeowners and business in high risk fire areas.

Technical information and Application

Flame Safe also manufactures fire retardant fabric products, such as it's trademarked FIREBUSTER™. The FIREBUSTER™ has been treated with a fire retardant chemical and shown in tests not to burn at temperatures exceeding 2000 degrees Fahrenheit. Tests conducted by Southwest Research Institute shows that the FIREBUSTER™ surpasses all requirements of the test procedure Cal 1237.1 by as much as 700%. Putting a FIREBUSTER™ over a fire will cut off the flow of oxygen thereby extinguishing the fire. It will eliminate the heavy smoke, while filtering the remainder.